A Multipurpose Thermal Convection Setup to Study Turbulent Super Structures

Engineering notes

Engineering notes will be added by the Power for Solar editorial team.

Chinese explanation / 中文解读

中文解读待补充：本站会优先为光伏效率、钙钛矿太阳能电池、储能技术、太阳能热利用、BIPV、并网技术等高价值论文补充中文说明。

Original abstract

A thermal convection apparatus has been designed to study turbulent super structures at high Rayleigh numbers and Prandtl numbers of the order of unity. This apparatus consists of a rectangular cell with a length of $3.50\,\mathrm{m}$, width of $0.35\,\mathrm{m}$, and variable height, which is fixed at $0.70\,\mathrm{m}$ for the present study. This cell is installed inside a $5.6\,\mathrm{m}$ long pressure vessel facility, known as \emph{Göttingen Uboot}, which can be filled with compressed gasses (air, helium, nitrogen, or sulfur hexafluoride) at pressures up to $19\,\mathrm{bar}$, enabling Rayleigh numbers up to $ Ra \leq 5\times 10^{12}$ and Prandtl numbers of approximately $0.7 \leq Pr \leq 0.9$. The convection cell is bounded vertically by top and bottom plates consisting of a three-layer composite structure in which a thin Lexan plate is sandwiched between highly conductive aluminum plates. This allows for spatially resolved heat flux measurements. Each plate is subdivided into four longitudinal segments that can be independently temperature-controlled to enable homogeneous temperatures and the imposition of horizontal temperature gradients at both the top and bottom boundaries. While the bottom plate is electrically heated, the top plate's temperature is regulated using temperature-controlled circulating pressurized water. The apparatus is well suited for precise heat flux measurements, with the results obtained being in good agreement with those previously reported in the literature.

Links and sources

• Official / arXiv page
• PDF from original source

Comments