AP Association for RHS-Enabled Cell-Free Uplink MIMO in Industrial Indoor UAV Networks

Engineering notes

Engineering notes will be added by the Power for Solar editorial team.

Chinese explanation / 中文解读

中文解读待补充：本站会优先为光伏效率、钙钛矿太阳能电池、储能技术、太阳能热利用、BIPV、并网技术等高价值论文补充中文说明。

Original abstract

Indoor industrial UAV uplink networks face serious blockage and shadowing from shelves, metal equipment, and production facilities. UAVs are also often clustered and fly along similar straight inspection routes at fixed heights. These features make traditional small-cell deployment less suitable, especially when high reliability, continuous coverage, and good service for weak UAVs are required. Cell-free networks can improve robustness through distributed access points (APs) and UAV?centric communications. Reconfigurable holographic surface (RHS)-enabled APs provide programmable analog receive beams and generate scalar post-RHS observations, which are jointly processed at the CPU for distributed uplink MIMO detection at relatively low hardware cost. Conventional AP association relies on distance, large-scale fading, or post-combining SINR obtained with user-specific digital combiners. Here, however, all UAVs served by a single-feed RHS AP share one amplitude?constrained receive pattern and one scalar AP output. We therefore derive an SINR-like score from this physical output and, under weak inter-AP disturbance correlation, approximate the CPU-side log-det objective by an additive per-AP surrogate, yielding a low-complexity ranking rule. The results show that the nearest AP is not always the best choice, the AP-UAV height difference may have an optimal value, and larger serving clusters bring diminishing returns. Simulations show that the proposed method improves the minimum UAV data rate, average spectral efficiency, fairness, and energy efficiency compared with benchmark schemes.

Links and sources

• Official / arXiv page
• PDF from original source

Comments