Material identification using laboratory X-ray beam tracking: quantitativeness and signal-to-noise ratio requirements

Engineering notes

Engineering notes will be added by the Power for Solar editorial team.

Chinese explanation / 中文解读

中文解读待补充：本站会优先为光伏效率、钙钛矿太阳能电池、储能技术、太阳能热利用、BIPV、并网技术等高价值论文补充中文说明。

Original abstract

Simultaneous structural and elemental characterisation of a specimen in a non-destructive manner is an instrumental approach with applications in a variety of fields including energy materials, cultural heritage and life sciences. This is routinely performed at synchrotron facilities, e.g. by combining X-ray imaging and X-ray fluorescence. In this work we describe an approach based on a monochromatic implementation of X-ray beam tracking (XBT), a multimodal imaging technique compatible with standard laboratory sources. Monochromatic XBT gives simultaneous access to quantitative absorption and phase properties of the sample, which are related to the atomic number and the electron density respectively: their combination allows for material discrimination. Here we focus on investigating the effect of the signal-to noise ratio on the quantitativeness of the results, hence on the elemental identification. We present an XBT experiment performed using a standard X-ray laboratory source to identify the composition of three different test samples made out of Ag, Fe and Cu. These specific materials were selected as relevant to archaeological studies e.g. when specimen buried for centuries are in contact with the surrounding soil containing traces of these metals. We review the results, current limitations and provide guidance for future developments for structural and elemental characterisation in a laboratory setting.

Links and sources

• Official / arXiv page
• PDF from original source

Comments