Mechanical mapping of thin elastic films and living cells with spherical tip atomic force microscopy probes at large indentations

Engineering notes

Engineering notes will be added by the Power for Solar editorial team.

Chinese explanation / 中文解读

中文解读待补充：本站会优先为光伏效率、钙钛矿太阳能电池、储能技术、太阳能热利用、BIPV、并网技术等高价值论文补充中文说明。

Original abstract

An analytical model to quantify large indentation force curves acquired on elastic thin films and living cells with spherical tip Atomic Force Microscopy (AFM) probes is presented. The model accounts for the bottom effect in the whole indentation range and overcomes the limitations of Sneddon's and Hertz's contact models, which are valid for semi-infinite thick samples, and of paraboloid tip models with bottom effect correction (BEC) that are applicable to spherical tips only for relatively small indentations. The model is experimentally validated with force volume measurements on polyacrylamide (PAA) hydrogel thin films, where an excellent agreement is obtained. The accurate correction of the bottom effect demonstrates that the intrinsic Young's modulus of PAA thin films increases for thickness below a critical value (~15 um). The model also shows excellent agreement with force curves acquired on live macrophages, providing accurate Young's modulus values for these very soft cells (E~200 Pa). Young's modulus values extracted with the proposed model significantly differ from those obtained from Sneddon's or paraboloid models with BEC, whose values deviate by 100% and -25%, respectively. Results show the potential of the proposed model for analysing force curve measurements with spherical tips at large indentations on thin film elastic materials and living cells at the micro and nanoscale.

Links and sources

• Official / arXiv page
• PDF from original source

Comments