Solar energy paper index
Numerical exploration on unveiling the photovoltaic potential of MgXS3(X = Ti, Zr, Hf) chalcogenide perovskites
One-line summary
A solar energy research paper on Numerical exploration on unveiling the photovoltaic potential of MgXS3(X = Ti, Zr, Hf) chalcogenide perovskites.
Engineering notes
Engineering notes will be added by the Power for Solar editorial team.
Chinese explanation / 中文解读
中文解读待补充：本站会优先为光伏效率、钙钛矿太阳能电池、储能技术、太阳能热利用、BIPV、并网技术等高价值论文补充中文说明。
Original abstract
Lead-free chalcogenide perovskites offer a nontoxic and thermally robust path beyond Pb-based perovskite solar cells (PSCs), but their device-level behavior in realistic three-dimensional geometries remains insufficiently characterized. In this work, we investigate ZnSe/MgXS3(X = Ti, Zr, Hf)/Sb2S3 solar cell architecture where MgXS3 absorbers from the II-IV-VI chalcogenide perovskite family is employed as the absorber layer. The device is analyzed using 3D finite-element simulations in COMSOL Multiphysics that self-consistently couple optical generation, drift-diffusion carrier transport, and heat transfer under AM 1.5G 1-sun illumination, following a fully coupled opto-electro-thermal framework. For each absorber composition, the impacts of absorber thickness, doping, and defect density are systematically investigated, and the contribution of an Sb2S3 back-surface-field (BSF) layer to carrier collection and spectral response is quantified. Under optimized conditions, MgZrS3, MgTiS3, MgHfS3-based devices achieves a simulated power conversion efficiency (PCE) of 28.18%, 26.72%, and 28.16%, respectively. The corresponding open-circuit voltage (VOC) values are 0.94 V, 0.74 V, and, 1.07 V while the short-circuit current density (JSC) values are 34.46 mA/cm2, 42.69 mA/cm2, and 29.89 mA/cm2, with fill factor (FF) values of 86.99%, 84.58%, and 88.02%, respectively. Coupled electro-thermal simulations further reveal a small spatially non-uniform steady-state temperature rise across the ultrathin cell stack, mainly governed by non-radiative recombination and Joule dissipation within the active layers. Overall, these results confirm MgXS3(X = Ti, Zr, Hf) chalcogenide perovskites as promising lead-free absorber materials and offer practical design guidance for achieving high-efficiency, thermally stable three-dimensional device architectures.
Links and sources
Need this topic turned into a technical roadmap?
Power for Solar can prepare a custom solar energy literature review, simulation code map, dataset map, and B2B photovoltaic technology assessment.
Request B2B research
Comments