Plasmonic nanocomposite helices for weather-adaptive LiDAR function

Engineering notes

Engineering notes will be added by the Power for Solar editorial team.

Chinese explanation / 中文解读

中文解读待补充：本站会优先为光伏效率、钙钛矿太阳能电池、储能技术、太阳能热利用、BIPV、并网技术等高价值论文补充中文说明。

Original abstract

Reliable light detection and ranging (LiDAR) is often challenged by multiscale water droplets on protective covers, as macroscopic raindrops cause refraction and diffraction, while microscopic fog condensation scatters light, distorting returned signals. Here, we present a bioinspired strategy for multiscale droplet clearance using plasmonic nanocomposite helices that couple passive photothermal antifogging with pressure-stable hydrophobic water repellence. Inspired by penguin feather barbules, copper nanoparticles are embedded within three-dimensional silica nanohelices via glancing angle co-deposition. The copper nanoparticles provide visible-light plasmonic heating while preserving >85% transmittance at 905 nm, and the helical architecture imparts hierarchical roughness, yielding a 143° contact angle. Under 1 sun illumination, the surface shows a 9.3°C temperature rise, clearing condensation within 6 seconds. During natural rainfall (3-5 mm/h), LiDAR transmission through the plasmonic nanohelices remains at 100%, whereas bare glass drops to 70% after 5 minutes. These results demonstrate weather-adaptive LiDAR operation for robust autonomous sensing. LiDAR performance is impaired by water droplets that scatter and distort light. The authors present a bioinspired coating of plasmonic copper nanoparticles in 3D silica nanohelices enables rapid antifogging and strong water repellence while maintaining high transmittance, clearing condensation in seconds and preserving signal in rain.

Links and sources

• PDF from original source

Comments