Power-Optimized Mitigation of Power Quality Issues and Effective Power Transfer in Electrified Hybrid Marine Vehicle Using Interlinking Converter During Islanded Mode

Engineering notes

Engineering notes will be added by the Power for Solar editorial team.

Chinese explanation / 中文解读

中文解读待补充：本站会优先为光伏效率、钙钛矿太阳能电池、储能技术、太阳能热利用、BIPV、并网技术等高价值论文补充中文说明。

Original abstract

The rapid electrification of marine transportation has increased the number of hybrid marine microgrids with the addition of renewables and energy storage. The continuously varying propulsion loads, fluctuating sea states, and renewable intermittency introduce significant challenges in bidirectional power transfer and power quality enhancement in marine vessels. This work presents a power-oriented operational strategy for a hybrid Roll-on/Roll-off (Ro-Ro) ferry-based marine microgrid (FMG) integrating diesel generators (DGs), Solar Photovoltaic (PV) arrays, and battery energy storage systems as the primary power sources. The proposed FMG adopts a hybrid AC/DC bus configuration linked through a bidirectional voltage source interlinking converter (ILC). The ILC facilitates multiple functionalities, including effective load compensation, mitigation of Total Harmonic Distortion (THD), continuous power support through bidirectional energy exchange, maintenance of balanced sinusoidal currents, and unity power factor (UPF) operation, thereby providing an integrated solution for improved power quality and reliable microgrid performance. A supervisory control (SC) is devised to operate the FMG seamlessly under islanded modes depending on the availability of power sources. To achieve the above-mentioned objectives, a power-optimized Dual Power-based Instantaneous Power Theory (DP_IPT) is employed and it involves a Sequential Delay Signal Cancelation (SDSC)-based Phase-Locked Loop (PLL) for the effective extraction of sequence components, so as to address the unbalance and nonlinearities in an effective manner with reduced oscillations. The proposed control strategy reduces diesel generator utilization through the effective integration of Solar PV and battery support during anchoring operation. The integration of renewable energy sources substantially enhances clean energy utilization, resulting in the reduction of overall carbon emissions, accounting for a near-40% decrease in emissions compared with the conventional diesel generator (DG)-based operating mode. The proposed FMG and control framework are validated through the Hardware-in-the-Loop (HiL) approach employing an OPAL-RT (OP4512) real-time controller. The HiL investigations demonstrate the efficacious working of the proposed control in achieving less carbonized and enhanced power quality operation for next-generation electrified hybrid maritime microgrids.

Links and sources

Comments