Preparation and Investigating the Physical, Mechanical and Thermal Performances of Sand/Soil/Recycled HDPE Composites

Engineering notes

Engineering notes will be added by the Power for Solar editorial team.

Chinese explanation / 中文解读

中文解读待补充：本站会优先为光伏效率、钙钛矿太阳能电池、储能技术、太阳能热利用、BIPV、并网技术等高价值论文补充中文说明。

Original abstract

The recycling of waste into materials is a form of recovery that offers a double advantage, such as eco-sustainable sanitation and the availability of new ecological construction materials in Civil Engineering. The present study aimed to develop a composite eco-material based on sand, soil and recycled plastic waste melted using a Scheffler solar concentrator (SSC). Then, two types of mix were formulated: a sand/PW mix with ratios of 75/25, 70/30, 65/35 and 60/40, and a sand/soil/PW mix with a ratio of 60/30/10. The SSC enabled an internal melting temperature of 172.42 °C to be reached. Specimens measuring 4 × 4 × 16 cm3 were made and tested using 3-point bending, compression, capillary absorption and thermal tests. The best mechanical resistance was obtained with the 65/35 ratio of the sand/PW mix, with average values of 12.15 MPa in 3-point bending and 23.96 MPa in compression. This composite eco-material had a water absorption rate of 0.4% and a thermal diffusivity of 0.36 mm2/s. On the other hand, the sand/PW/laterite mix had a mechanical strength of 10.1 MPa in 3-point bending and 22.83 MPa in compression, with a water absorption rate of 2.3% and a thermal diffusivity of 0.44 mm2/s. In addition to these initial results, we plan to analyze the effect of thermal shock or wetting-drying cycles on the durability of this composite eco-material. As these properties comply with the established standards, the sand/soil/recycle HPDE composites can be used for applications such as pavers and tiles for interior flooring, and hollow and solid blocks.

Links and sources

• PDF from original source

Comments