Resonant heterodyne conversion applied to a low-frequency haloscope for dark matter axion searches in the 1-35 MHz range

Engineering notes

Engineering notes will be added by the Power for Solar editorial team.

Chinese explanation / 中文解读

中文解读待补充：本站会优先为光伏效率、钙钛矿太阳能电池、储能技术、太阳能热利用、BIPV、并网技术等高价值论文补充中文说明。

Original abstract

We study resonant heterodyne up-conversion in the RADES-BabyIAXO haloscope as a method to search for low-mass dark matter axions using microwave cavities. Starting from axion electrodynamics, we derive the axion-induced source term and the power extracted through a readout mode, explicitly accounting for the finite axion linewidth. This leads to effective quality factors that determine the pump-axion mixing, detection bandwidth, and detected signal power. We extend the BI-RME 3D full-wave formulation to heterodyne axion detection in a realistic two-port cavity, including pump leakage into the readout channel. Applying the formalism to the largest RADES-BabyIAXO cavity identifies the $\mathrm{quasi\textrm{-}TE}_{011}-\mathrm{quasi\textrm{-}TM}_{010}$ mode pair as a favorable configuration, enabling sensitivity to axion frequencies between 0.9 and 34.6 MHz. Analytical and full-wave predictions show excellent agreement at resonance, while the full-wave model provides a more accurate description off resonance and allows a precise characterization of the pump leakage. We also derive the optimal port couplings that maximize the scanning rate. Sensitivity projections for cryogenic copper and superconducting niobium cavities indicate that, under thermal-noise-limited conditions and assuming sufficient pump-leakage rejection, the experiment could probe axion-photon couplings down to $10^{-15}\,\mathrm{GeV}^{-1}$ at 90% confidence level, representing a significant improvement over previous heterodyne-based searches.

Links and sources

• Official / arXiv page
• PDF from original source

Comments